Loading ...
Loading ...
Loading ...
17
v.03062023
Mount the Indoor Unit
1. Carefully pass the pipes, hose, and cable bundle through the wall hole.
2. Hook the top of the indoor unit on the mounting plate.
3. Push the unit lightly left and right to make sure it is î´ªrmly hooked on the mounting plate.
4. Push down the bottom of the indoor unit and snap into the mounting plate.
Bundle the Pipes, Hose, and Wires
1. Arrange the pipes, hose, and wire cable according to the following image. Make sure the drain hose
is positioned at the bottom and avoid crossing or tangling any parts.
2. Wrap the bundle with Insulation tape.
Wire Cable
Refrigerant Pipe
Insulation Tape
Insulation Tape
Drain Hose
(Must positioned at the bottom)
After connecting the refrigerant pipes, electrical wires, and drain hose, they must be bundled with
insulating tape before passing them through the wall hole.
Indoor Unit Installation
Loading ...
Loading ...
Loading ...