Loading ...
Loading ...
Loading ...
12
Installation Guide
Molly Bolt Wall StudWall WallMounting Plate Mounting Plate
Bolt Wood Screw
Hollow Drywall Wood Stud
Install Mounting Bracket
1. Locate the studs and electrical wires inside the wall. Then measure the indoor unit dimensions and
add the surrounding clearance space to determine the exact mounting location.
2. Use a spirit level to level the mounting plate on the wall. Then mark out the screw hole positions.
3. Drill holes in the wall, then insert wall anchors into the holes and afx the mounting plate to the
wall using screws.
*Use a wood screw if the hole position is directly on a wood stud.
NOTE:
• You must use the correct wall anchor according to the type of the wall.
Picking a Indoor Unit Instalalltion Location
• Make sure the air inlet and outlet are clear of any obstruction.
• Condensation can be easily drained.
• All connections can be easily made to the outdoor unit.
• Indoor unit is out of children’s reach.
• Indoor unit is accessible for maintenance.
• Install 3m / 10ft away from TV or radio appliances.
(Radio interference may occur if appliances are placed too close to each other)
• Do not install in a laundry room or by a swimming pool.
• Ensure there is enough clearance space around the unit.
‣ Page 11
Indoor Unit Installation
Loading ...
Loading ...
Loading ...