Loading ...
Loading ...
Loading ...
07
08
https://www.altonindustries.com
info@altonindustries.com
BATTERY TOOL USE AND CARE
1
Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire
when used with another battery pack.
2
Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
3
When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
4
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery
may cause citation orburns.
5
Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
6
Do not expose a battery pack or tool to fire or excessive temperature
Exposure to fire or temperature above 130°C may cause explosion.
7
Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
CORDLESS CHAIN SAW SAFETY WARNINGS
1
Keep all parts of the body away from the saw chain when the chain saw
is operating. Before you start the chain saw, make sure the saw chain is
not contacting anything. A moment of inattention while operating chain
saws may cause entanglement of your clothing or body with the saw
chain.
2
Always hold the chain saw with your right hand on the top handle and
your left hand on the front handle Holding the chain saw with a reversed
hand configuration increases the risk of personal injury and should
never be done.
3
Hold the power tool by insulated gripping surfaces only, because the
saw chain may contact hidden wiring Saw chains contacting a "live" wire
may make expose metal parts of the power tool "live"and could give the
operator an electric shock.
4
Wear safety glasses and hearing protection. Further protective
equipment for head, hands, legs and feet is recommended. Adequate
protective clothing will reduce personal injury by flying debris or
accidental contact with the saw chain.
5
Always keep properfooting.
6
When cutting a limb that is under tension be alert for spring back. When
the tension in the wood fibres is released the spring loaded limb may
strike the operator and/or throw the chain saw out of control.
7
Use extreme caution when cutting brush and saplings. The slender
material may catch the saw chain and be whipped toward you or pull
you off balance.
SERVICE
1
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
2
Never service damaged battery packs. Service of battery packs should
only be performed by the manufacturer or authorized service providers.
8
Carry the chain saw by the front handle with the chain saw switched off
and away from your body. When transporting or storing the chain saw
always fit the guide bar cover. Proper handling of the chain saw will
reduce the likelihood of accidental contact with the moving saw chain.
9
Follow instructions for lubricating, chain tensioning and changing
accessories. Improperly tensioned or lubricated chain may either break
or increase the chance for kickback.
2Follow instruction for lubricating and changing accessories.
10
Keep handles dry, clean, and free from oil and grease. Greasy, oily
handles are slippery causing loss of control.
Loading ...
Loading ...
Loading ...