Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
CHECK FILTER FEATURE:
LIGHT On
YOU WILL SEE:
Note: This feature isa reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling. The LED (light) will
illuminate after 250 hours of operation, To reset after cleaning the filter, press the "Check Filter" button end the light will go off,
CLF_ANAIRFF_ATURE(onsomemodels): YOU WILL SEE: LIGHT On
DO THIS:
PRESS
CLEAN AIR
BUTTON
Note: When this feature is "ON", the electronic air purifierisenergized to remove pollenand impudUesfrom the air. To cancel this feature,
press the Clean Air button (the LIGHT will turn off).
Note: This feature can be activated on the unittouchpad ONLY,
SLEEP FEATURE:
YOU WILL SEE: LIGHT On
DO THIS:
PRESS
SLEEP BU3-i'ON
Note: In this "MODE" the set temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then
increase by another 2 degrees F after an additional 30 minutes, This new temperature will be maintained for 7 hours before itreturns to the or-
iginally selected temperature, This ends the "Sleep" MODE and the unit will continue to operate as originally programmed, The "Sleep"
MODE program can be cancelled at any time during operation by again pressing the "Sleep" button.
8
Loading ...
Loading ...
Loading ...