Tripp Lite SMX1200XLHG Owner’s Manual

Loading ...

Quick Installation

NORM DELAY

These connections are optional. Your UPS will function properly without these connections.

Serial Communications

(Select models only)

If your UPS has a DB9 port, you can connect it to the DB9

port of a computer with the included cable. Use with

Tripp Lite’s PowerAlert Software for automatic ﬁle saves

and safe shutdown in case of power failure. (See Basic

Operation Section.)

USB Communications

Connect the USB port of your UPS to the USB port of a

computer with the included cable. Use with Tripp Lite’s

PowerAlert Software for automatic ﬁle saves and safe

shutdown in case of power failure. (See Basic Operation

Section.)

Tel/DSL Protection

(Select Models Only)

Using telephone cords, connect your wall jack to the UPS

jack marked “LINE” (or “IN”) and your equipment to the

UPS jack marked “EQUIP” (or “OUT”). This will protect your

equipment from surges over the phone line, but you should

make sure that your equipment is also protected against

surges on the AC line.

External Batteries

(Select Models Only)

External batteries are only needed to extend runtime. Adding

external batteries will increase recharge time as well as

runtime. Complete installation and mounting instructions

for your battery pack appear in the battery pack’s owner’s

manual. Make sure that cables are fully inserted into

their connectors. Small sparks may result during battery

connection; this is normal.

Loading ...

Tripp Lite SMX1200XLHG SmartPro 230V 1kVA 750W Medical-Grade Line-Interactive Tower UPS