Loading ...
Loading ...
Loading ...
BEFORE OPERATING
Before operating your new Microwave Drawer make sure you
read and understand this operation manual completely.
° Before the Microwave Drawer can be used, follow these
steps:
t Plug in the Micro++aveDra++er. I+':o:3uII
,+ill
appear.
2 Touch the Stop/Clear pad. _ uill
appear.
3 Set clock.
Note:
* The Microwave Drawer can be programmed with the
drawer open except for START/Minute Plus.
TIMER
I Touch Timer/Clock pad and number [_.
2 Enter time.
3 Touch Timer/Cloek pad again.
To cancel timer, touch Stop/Clear.
TO SET THE CLOCK
t Touch Timer/Clock pad and number [_.
2 Touch number pads for correct time of day and touch
Timer/Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, _ x_ill appear in the display. Touch the
Stop/Clear pad and re-enter the time.
* If the electrical power supply to your Microwave Drawer
should be interrupted, the display ++illintermittently show
_ _ after the po++eris reinstated. If
this occurs during cooking, the program ++illbe erased. The
time of day ++illalso be erased. Simply touch Stop/Clear
pad and reset the clock for the correct time of day.
STOP/CLEAR
Touch the Stop/Clear pad to:
t Erase if you make a mistake during programming.
2 Cancel timer.
3 Stop the Microwave Drawer temporarily during timed
cooking.
4 Return the time of day to the display.
5 Cancel a program during cooking, touch t++ice for timed
cooking.
OPEN OR CLOSE MICROWAVE DRAWER
Always press the OPEN or CLOSE pad on the control panel
to open or close the Microwave Drawer.
Do not push or pull the Microwave Drawer by hand,
except in case of emergency, such as a power failure. If
necessary, push or pull slowly.
10
Loading ...
Loading ...
Loading ...