Ancona AN-2980SS User Manual and Installation Instructions

Loading ...

— 18 —

Operation

Setting Pizza mode for microwave pizza

Place the microwave pizza on the ceramic tray and put it in the oven following package directions.

1. Touch .

2. Touch the number key 3 or touch repeatedly until MICROWAVE PIZZA is displayed.

3. Touch .

4. Touch again. Sensing and the microwave symbol light up on the display.

The appliance starts sensing.

When sensing is complete, a beep will sound and the calculated cook time will start to count down.

After the cook time has run out, a beep will sound. The appliance turns off and the clock is displayed.

Note: Do not open the door during the sensing process, or the program will be cancelled.

Once the calculated cook time is displayed, you can open the door to stir, turn or rearrange the food. Touch

to resume operation.

Opening the appliance door during operation

Opening the appliance door during operation will interrupt the current mode. When you close the appliance door, operation

will be resumed.

Sensor Cooking

You can select two sensor cooking modes. Sensor cooking allows you to cook many of your favorite foods without

selecting cooking times and power levels. The microwave oven automatically determines the required cooking time for

each food item.

For best results for cooking by sensor, follow these recommendations:

•Food cooked with the sensor system should start from normal storage temperature.

•Turntable tray, ceramic tray and outside of container should be dry.

•Foods should always be covered loosely with microwavable plastic wrap, wax paper or lid.

•Do not open the door or touch Clear/Off key during sensing time. When sensing time is over, the oven beeps once and

the remaining cooking time will appear in the display. At this time you can open the door to stir, turn or rearrange the

food.

Sensor Reheat

TheSensorReheatfeatureletsyoureheatdinnerplatesorcasseroles(8-16oz.)foryourcookingconvenience.

Setting Sensor Reheat

1. Touch .

2. Touch . Sensing is displayed. The microwave operates during sensing.

3. When sensing is complete, a beep will sound and the calculated cook time will start to count down.

Note: Do not open the door during the sensing process, or the program will be cancelled.

Once the calculated cook time is displayed, you can open the door to stir, turn or rearrange the food. Touch

to resume operation.

When sensor reheat is nished, a beep will sound and the appliance turns off.

Loading ...

Ancona AN-2980SS 2-piece o24 Inch 4.02 cu. ft. Oven Set with Built-in Convection Oven and Built-in Speed Combination Microwave Oven