Loading ...
Loading ...
Loading ...
13
High-Pass Filter
The high-pass filter helps prevent the UB-440 from picking
up low-frequency noises that may interfere with your
recording, like a rumble from an air conditioner. The
high-pass filter is programmed to 80 Hz.
To turn on the high-pass filter, slide the switch so it rests
under the marking. To turn off the high-pass filter, slide the
switch so it rests under the marking.
Positioning the UB-440
The UB-440’s cardioid polar pattern will pick up sound
mostly from in front of the microphone. You will usually want
the front of the microphone—the side with the Senal logo—to
face the sound source, although it is important to experiment
with microphone placement and positioning to find the best
solution for your specific needs.
You can adjust the angle of the microphone stand to aim the
microphone toward the sound source.
When singing into the microphone, you may want to use a
pop filter to reduce noise from aspirated plosives like p and b
sounds and to keep corrosive moisture away.
High-Pass Filter/Positioning the UB-440
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Loading ...
Loading ...
Loading ...