Loading ...
Loading ...
Loading ...
_IWARNING: Never use a battery that has been
dropped or received a sharp blow, A damaged battery
is subject to explosion. Properly dispose of a dropped
battery immediately. Failure to heed this warning can
result in serious personal injury.
Before using battery charger, read all instructions
and cautionary markings in this manual, on
battery charger, and product using battery
charger. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
• To reduce risk of injury, charge only nickel-
cadmium type rechargeable batteries. Other types
of batteries may burst causing personal injury and
damage. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
• Do not expose charger to wet or damp conditions.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
• Use of an attachment not recommended or sold
by the battery charger manufacturer may result in
a risk of fire, electric shock, or injury to persons,
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury,
• To reduce risk of damage to charger body and
cord, pull by charger plug rather than cord when
disconnecting charger. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
• Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected
to damage or stress. Following this rule will reduce
the risk of serious personal injury.
• An extension cord should not be used unless
absolutely necessary. Use of improper extension
cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
• That pins on plug of extension cord are the
same number, size and shape as those of
plug on charger.
• That extension cord is properly wired and in
good electrical condition; and
• That wire size is large enough for AC ampere
rating of charger as specified below:
Cord Length (Feet) 25' 50' 100'
Cord Size (AWG) 16 16 16
Note: AWG = American Wire Gage
• Do not operate charger with a damaged cord or
plug, Ifdamaged, have replaced immediately by a
qualified serviceman. Following this rule willreduce the
riskofelectricshock,fire, orseriouspersonalinjury.
• Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman. Following
this rulewill reducethe risk ofelectricshock,fire, or
seriouspersonalinjury.
• Do not disassemble charger; take it to a qualified
serviceman when service or repair is required.
incorrect reassembly may result in a risk of
electric shock or fire. Followingthis rulewillreduce
the risk of electricshock, fire, or serious personal
injury.
• To reduce the risk of electric shock, unplug
charger from outlet before attempting any mainte-
nance or cleaning. Turning off controls will not
reduce this risk. Following this rulewill reducethe
riskof electricshock,fire, or seriouspersonalinjury.
• Do not use charger outdoors. Followingthis rulewill
reducethe riskof electricshock,fire, or serious
personalinjury.
• Disconnect charger from power supply when not
in use. Followingthis rulewill reducethe riskof
electricshock,fire, or seriouspersonal injury.
RISK OF ELECTRIC SHOCK. DO NOT TOUCH
UNINSULATED PORTION OF OUTPUT CONNEC-
TOR OR UNINSULATED BA'I-rERY TERMINAL.
Save these instructions. Refer to them frequently
and use them to Instruct others who may use this
tool. If you loan someone this tool, loan them
these instructions also. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
_WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
Loading ...
Loading ...
Loading ...