Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 2391477A384/A
e
3. After a few seconds, the and
indicator lights remain on steadily and the
appliance waits for the set start time to start
the cleaning cycle.
End of pyrolytic function
1. Turn the function knob to position 0 to exit
the function.
2. Open the door and collect the residue
deposited inside the oven cavity with a
damp microfibre cloth.
Deactivating the door lock lever manually
(on some models only)
The door lock lever is in the first slot on the left,
under the control panel, at the top of the oven
front.
During standard cleaning operations, the door
lock lever might be inadvertently operated.
Door lock lever activated (top view)
1. Move the door lock lever to the right until it
stops.
(top view)
2. Gently release the door lock lever.
The spring of the mechanism sets back the door
lock lever in deactivated position.
To prevent any damage to the mechanism,
never try and deactivate the door lock lever by
pushing it forcedly to the left.
(top view)
Extraordinary maintenance
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-abrasive
sponge and wash with lukewarm water.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
• The following operations must
always be performed with the
appliance cold and switched off.
• Never try to release the door lock
lever during pyrolytic function.
Power voltage
Danger of electrocution
• Unplug the appliance.
• Wear protective gloves.
Loading ...
Loading ...
Loading ...