Loading ...
Loading ...
Loading ...
22 - CLEANING AND MAINTENANCE 91477A384/A
3. Use a non-scratch sponge with brass
filaments on hard to remove deposits.
4. In case of grease residues use specific oven
cleaning products.
5. Remove the residual water inside the oven.
6. Replace the self-cleaning panels and the
rack/tray support frames, if fitted.
For greater hygiene and to avoid foods taking
on unpleasant odours:
• We recommend drying the inside of the
oven with a fan assisted function at 160°C
for around 10 minutes.
• If self-cleaning panels are fitted, we
recommend that you dry the inside of the
oven with a simultaneous catalytic cycle.
Pyrolytic function (on some models
only)
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following the
usual cleaning instructions.
• Remove any food residues or large spills
from previous cooking operations from the
inside of the oven.
• Completely remove all accessories from
inside the oven.
• For very stubborn encrustations spray an
oven cleaning product onto the glass (read
the warnings on the product); leave for 60
minutes, then rinse and dry the glass using
kitchen roll or a microfibre cloth.
• Remove the temperature probe, if present.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. Turn the function knob to the symbol.
2. Press followed by .
3. Press and hold and use or to
set the cleaning cycle time from a minimum
of 2 hours to a maximum of 3 hours.
4. Two minutes after the pyrolytic cycle has
started the door is locked (the door lock
indicator light comes on) by a device that
prevents the door from being opened.
5. At the end of the pyrolytic cycle, the door
remains locked as long as the temperature
inside the oven returns to safety levels.
6. At the end of the pyrolytic cycle, wait for the
oven to cool down and collect the residues
deposited inside with a damp microfibre
cloth.
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle start
time like all other cooking functions.
1. After selecting the pyrolytic cycle duration,
press the temperature knob. The display
shows the current time and the indicator
light comes on.
2. Turn the temperature knob to set the time at
which you wish to complete the pyrolytic
cycle.
We recommend wearing rubber gloves
for these operations.
We recommend removing the door in
order to make the manual cleaning of
the parts that are difficult to reach
easier.
See General safety instructions.
Pyrolytic cleaning is an automatic high-
temperature cleaning procedure which
causes dirt to dissolve. Thanks to this
process, it is possible to clean the inside
of the oven very easily.
It is not possible to select any function
once the door lock device has been
activated.
During the pyrolytic cycle,
the fans produce a more intense
level of noise due to a
greater rotation speed. This is normal
and
is intended to provide
a more effective
heat dissipation. At the end the pyrolytic
cycle,
the fans will automatically
continue to operate for long
enough to avoid overheating the walls
of adjacent units and the front of the
oven.
It is not possible to select any function
once the door lock device has been
activated.
Loading ...
Loading ...
Loading ...