Loading ...
Loading ...
Loading ...
15.Gear Learning (Relearn Crank Position Sensors)
After replacing the ECU, the crankshaft position sensor, the crankshaft flywheel, and the fault
codes that the tooth speed has not learned, the tooth speed learning is required. There will
be a fault code if it is not done or done without success.
16.EGR Reset (Exhaust Gas Re-circulation)
This function can be used for self-learning after EGR (exhaust gas recirculation) valve
cleaning or replacement.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18. Adblue Reset (Diesel Engine Exhaust Gas Filter) (Europe: Adblue/ US: DEF)
After the diesel exhaust gas treatment fluid (automobile urea) is replaced or filled up, the
urea reset operation is required
19.SRS REST（Airbag Reset）
This function can reset the airbag data and clear the airbag collision fault indicator; when the
vehicle is in a collision, after the airbag is deployed, a fault code corresponding to the
collision data will appear. The airbag indicator light is on, and the fault code cannot be
cleared. Since the data in the airbag computer is one-time, all parts must be replaced with
new accessories as required, but after executing this function, the data of the airbag
computer can be restored, and the fault code can be cleared, the airbag indicator will go out,
and the airbag computer can continue to be used.
20.Coolant Bleeding (electronic pump activation)
Use this function to activate the electronic water pump before venting the cooling system.
21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When
the gearbox is disassembled or repaired (after some of the car battery is powered off), it will
lead to shift delay or impact problem. In this case, this function needs to be done so that the
gearbox can automatically compensate according to the driving conditions so as to achieve
more comfortable and better shift
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
A sensor used to detect the content of nitrogen oxides (NOX) in engine exhaust. NOX failure
to reinitialize and replace the NOX catalytic converter, it is necessary to reset the catalytic
converter learning value stored in the engine ECU
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
Loading ...