Loading ...
c) Fuel additive nozzle removal or replacement
d) Catalytic oxidizer disassembly or replacement
e) DPF regenerative fault lamp lights up and matches after maintenance
f) When the DPF regeneration control module is repaired and replaced
5. SAS (Steering Angel Sensor Reset)
A. The steering angle reset is to find the relative zero position where the car keeps driving in
a straight line. With this position as a reference, the ECU can calculate the accurate angle
when turning left and right.
B. Generally, after replacing the steering angle position sensor, replacing the mechanical
parts of the steering system (such as: steering gear, steering column, tie rod ball joint, claw
horn), completing the four-wheel alignment, and repairing the body, it is necessary to reset
the steering angle.
6. TPMS (Tire Pressure Monitoring System Reset)
A. When the car tire pressure failure light is on, after maintenance, you need to reset the tire
pressure through the tire pressure reset function and turn off the tire pressure failure
indicator
B. If the tire pressure is too low or leaking, replace or install tire pressure monitoring
equipment, replace tires, tire pressure sensors are damaged, and vehicles with tire pressure
monitoring function are required to be repaired after the tires are rotated. Tire pressure
reset
7.IMMO (Key Programming=Anti-theft Matching)
A. In order to prevent the car from being used by illegal keys, the anti-theft key matching
function enables the car's anti-theft control system to recognize and authorize the remote
control before the car can be used normally.
B. When replacing the ignition switch key, ignition switch, combination meter, engine control
unit (ECU), body control module (BCM) and remote control battery, it is necessary to perform
anti-theft matching
8.ABS (ABS Exhaust=ABS Bleeding)
A. When the ABS system contains air, it is necessary to exhaust the brake system through the
ABS exhaust function to restore the brake sensitivity of the ABS system.
B. When replacing the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake
pipeline and brake fluid replacement, you need to use the ABS exhaust function to exhaust
the ABS system
9.Sun Roof Reset
-The sunroof needs to be reset when the sunroof control unit have communication problem
or changed.
10.SUS Reset (Suspension matching=Air Suspension Reset)
A. This function can adjust the height of the vehicle.
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
MUCAR
Loading ...
Loading ...
Loading ...