USER GUIDE
Model: Alpha 65
STEPS TO JUMP START YOUR VEHICLE
ABOUT THE FORCE START FUNCTION
Why the screen shows nothing when you try to start your car ?
3 steps to fix your problem:
If the screen doesn’t display anything when you have correctly connected the clamps to your car, it means that your battery voltage is
extremely low, you can use the Force Start Function to enter boost mode.
1. Check the clamps connection and the product’s battery is above 20%.
2. Press the Power Button and Flashlight Button simultaneously for 2-3 seconds.
3. The screen shows “READY”, and go back to start engine ignition.
WARNING: WHEN USING THE FORCE START FUNCTION, AUTO-DETECTION AND SAFETY FEATURES WILL BE DISABLED.
ABOUT THE ERROR CODES
Error Code
SolutionReason
Reverse the clamps and ensure the correct connection.‘’+’’and ‘’-’’ poles of battery clamps reversed.
The voltage of the car battery is between 2-8V.
The product’s operating temperature is too high / low.
Jump start the battery more than 5 times within 10
minutes, the product will automatically enter the safe
mode.
Press the Power Button and Flashlight Button
simultaneously for 2-3s to start force output.
(Force Start Function)
Please store it back to where the temperature is
between 32°F to 113°F.
The safe mode will be off automatically after 10
minutes waiting. (Please do not turn off the product
during the process)
Charge the device at extremely low or high temperature.
Please charge the device at room temperature.
1200A 6.5L 4.0L
PEAK AMPS GAS DIESEL
12,000mAh
BATTERY CAPACITY
Insert the jumpercable into the booster
and connect the clamps to the car battery.
‘’READY’’ sign shows on the screen. Start your car engine.
Step 1 Step 2 Step 3
ABOUT USB-A OUTPUT PORT
USB-A
1.Plug the cable into the USB-A
output port.
IN/OUT
Plug the cable into the USB-C
output port to charge your device.
THE CHARGER INCLUDED IN THE BOX IS A 10W WALL CHARGER. NOTE: 65W WALL CHARGER CAN BE PURCHASED SEPARATE-
Fully charge your Alpha 65 jump starter in 45 minutes with our patented 65W recharge technology.
2.Press the Power Button.
ABOUT LED FLASHLIGHT
CHARGER YOU ALPHA 65 JUMP STARTER
1.Hold the Flashlight Button for 1-2s.
2.Press briefly to switch the light modes.•50% Lumen Light → 100% Lumen Light → White
Strobe Light → White SOS Light
Flashlight
Button
CONTACT US
https://support.hulkman.com 46 Smith Alley, Suite 200 Pasadena, CA 91103 +1 (877) 892-9703 [email protected]
