Loading ...
Loading ...
Loading ...
ENGLISH
10
high volume pump inflator connection
12
. Ensure
the universal valve adapter is not pointed at anyone
oranything.
1. Remove the high-volume hose
7
from the
storagelocation.
• Line up the hose end
23
with the
high-volume pump
deflate connection
11
. Then, firmly slide in the hose so it
is securly in place.
2. Insert the hose, or it's tapered nozzle
8
into the object
beingdeflated.
3. Press the high-volume side of the mode power
switch
2
, as shown in figure G, indicated by the air
mattress symbol.
4. To turn off, push the power switch to the centerposition.
5. To remove the hose, twist the hose clockwise and slide
hoseoff.
7
23
11
Figure H
Setting the automatic shut-off pressure
NOTE: The LCD will only show inflation pressures when the
inflator is being used. In both inflation and pump mode the
unit will show batterystatus.
1. To switch between the different units (psi, bar or kPa),
press the pressure mode button
5
until the required
units aredisplayed.
2. Press the - or + pressure setting buttons
4
until the
required pressure isdisplayed.
3. After 3 seconds the display will flash and return to a
reading of "0.0". This isnormal.
4. Connect the universal valve adaptor and accessories,
if required, to the item to be inflated, making sure that
the lever of the valve adaptor is in the down position to
lock it inplace.
5. To start the inflator press the mode power switch
2
,
towards the side of the tire symbol.
6. When the item to be inflated has reached the preset
value the unit will automatically turn off. NOTE: You
may notice the actual pressure reading may drop after a
couple of seconds. This isnormal.
7. To stop the inflator at any time, press the main power
button back to the centerposition.
NOTE: If the AC/DC power switch is turned off, all settings
will be lost and will need to be reentered. This is a safety
feature to prevent the risk of items OVERINFLATING.
Using the inflator as a pressure gauge
1. Connect the universal valve adaptor
9
to the item to
bechecked.
2. Press the mode power switch
2
, on the side of the tire
symbol.
3. The LCD will display the item'spressure.
4. After checking, press the mode power switch
2
back
to the center position and return the air hose to the
storagelocation.
MAINTENANCE
Use only a dry cloth to clean the tool. Never let any liquid
get inside the tool; never immerse any part of the tool into
aliquid.
IMPORTANT:
To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed
in this manual) should be performed by authorized service
centers or other qualified service personnel, always using
identical replacementparts.
ACCESSORIES
Recommended accessories for use with your appliance are
available from your local dealer or authorized service center.
If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING: The use of any accessory not
recommended for use with this appliance could
behazardous.
Loading ...
Loading ...
Loading ...