Loading ...
Loading ...
Loading ...
Changing the programme sequence
54
Changing the programme
(safety lock)
It is not possible to change the
programme, the temperature, the spin
speed or the selected Extras after the
programme has started. This prevents
the appliance being operated
unintentionally, e.g. by children.
If the washing machine is switched off
during active programme operation,
the standby function does not switch
the washing machine off completely
after 15minutes. Safety functions
continue to be active because there
may still be water inside the drum.
Interrupting a programme
Turn the programme selector to the
position.
The washing machine switches off.
To continue: Turn the programme
selector to the position of the wash
programme that was started.
Cancel?
OK
Yes
Touch the sensor.
The following will appear in the display:
Cancel?
OK
No
Confirm with the OK sensor.
Useful tip: If Cannot be changed
appears in the display, the programme
selector is in the incorrect position.
Cancelling a programme
You can cancel a programme at any
time after it has started.
Turn the programme selector to the
position.
Turn the programme selector to the
Cottons programme.
The following will appear in the display:
Cancel?
OK
Yes
Touch the OK sensor.
The suds will be pumped away. The
following will appear in the display:
Prog. cancelled
OK
Wait until the symbol in the display
goes out and the door unlocks.
Pull open the door.
Remove the laundry.
Selecting a new programme
Close the door.
Turn the programme selector to the
required programme.
Check that there is still detergent in
the dispenser drawer. Add more
detergent if necessary.
Touch the Start/Add laundrysensor.
Loading ...
Loading ...
Loading ...