Loading ...
Loading ...
Loading ...
Before using for the first time
20
3. Removing the transit bars
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation”.
The following message appears in the
display:
Remove transit bars
Confirm with the OK sensor.
4. Commissioning TwinDos
The UltraPhase1 and UltraPhase2
values are preset in the standard
settings and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with the OKsensor.
The following message appears in the
display:
Set now
To set up TwinDos now, touch the OK
sensor.
To postpone set-up until later, touch
the sensor until the following
appears in the display: Set later and
pressOK to confirm.
Settings for compartment
The UltraPhase1 values are preset in
the standard settings.
Agent for
OK
Confirm with the OK sensor.
Miele UltraPhase 1
OK
Confirm with the OK sensor.
The following appears in the display:
Set the dosage. Observe water hardness
level
Confirm with the OK sensor.
The dispensing quantity for
UltraPhase1 for (hardness range I)
is preset.
Per load
OK
ml46
Confirm the preset value with the
OKsensor. If you want to change this
value, use the sensors and
confirm with the OK sensor.
UltraPhase1
Hardness level I 46 ml
Hardness level II 58 ml
Hardness level III 70 ml
Loading ...
Loading ...
Loading ...