Tripp Lite B132-008A-2 Owner's Manual

Owner's Manual - Page 21

For B132-008A-2. Also, The document are for others Tripp Lite models: B130-101-2, B130-101A-2, B130-101-WP-1, B130-101A-WP-2, B130-101S-2, B130-111, B130-111A, B130-101-U, B132-002-2, B132-002A-2, B132-004-2, B132-004A-2, B132-100-1, B132-100A, B132-100-WP-1, B132-100A-WP-1, B132-110, B132-110A

Loading ...

Installation continued

Extender/Repeater Kit Installation

(B130-101-2, B130-101A-2, B130-111 and B130-111A)

Note:

1. For models that support EDID copy, perform the EDID copy procedure described

in this manual prior to installation.

2. An extender/repeater kit installation can start with a B130-101-2, B130-

101A-2, B130-111 or B130-111A. The only difference between these kits is the

type of remote unit that comes with them. The B130-101-2 and B130-101A-2

come with remote receiver units, and the B130-111 and B130-111A come with

remote repeater units.

3. The diagram above shows a B130-111A installation, with the maximum number

of remote units connected. Installation will be the same for the B130-111,

except there will be no audio connections. Installation will be the same for the

B130-101-2 and B130-101A-2, except that instead of adding remote units to

the end of the installation, remote repeater units will be inserted in between the

local and remote units that come with the kits.

4. A 1024 x 768 (60 Hz) signal can be extended up to 1,000 ft. from the source to

the ﬁrst remote repeater unit in the installation. A 1024 x 768 (60 Hz) signal can

be extended up to an additional 1,000 ft. between the ﬁrst remote repeater unit

and the last display in the installation. Up to 4 remote units (3 remote repeaters

and 1 remote receiver) can be connected together to transmit a signal to

up to 4 points in a 2,000 ft. chain.

15-08-104-933289-EN.indd 21 8/21/2015 3:45:50 PM

Loading ...

Tripp Lite B132-008A-2 8-Port VGA over Cat5/6 Splitter/Extender, Box-Style Transmitter

Owner's Manual - Page 21