Loading ...
Loading ...
Loading ...
OPERATING THE GRILL
24
-----------------------------------
WARNING
----------------------------------
Read and follow all warnings and instructions contained in the preceding sections of this manual.
-----------------------------------------------------------------------------------
Control Panel
-----------------------------------------------------------------------------------
• LCD Screen: Will display the current grill temperature
(ACTUAL) and meat probe temperature (MP1). See
Troubleshooting for more information on error codes.
• Flashing Screen: Indicates the unit was just
connected to AC power. Screen flashes three times,
then turns off.
• MP1: Indicates the meat probe temperature when
probe is connected.
• Actual: Indicates the current temperature of unit.
• Set: Indicates the desired temperature that has been
selected.
• noP: Indicates that no meat probe is connected.
• Motor: Indicates the auger motor is turning and
feeding pellets.
• Ignitor: Indicates the igniter is on. When first starting
your unit, the igniter runs continuously for the start-up
cycle.
• Fan: Indicates the fan is running. If the grill is in operation, the fan is on.
• Prime: Press and hold the Prime Button to activate an extra feed of pellets to the fire pot. This can
be used to add more fuel to the fire just before opening the barrel lid, resulting in a quicker heat
recovery time. It can also be used to add more fuel while smoking to increase the intensity of clean
smoke flavor. Overfeeding the fire pot may damage to grill barrel paint.
• F/C: The Temperature Switch Button is used to change the temperature readout on the LED
screen. Press the button to switch to Fahrenheit (°F) or to Celsius (°C), as preferred. Default is set to
Fahrenheit.
Loading ...
Loading ...
Loading ...