Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
17
STEP 18
-----------------------------------------------------------------------------------
STEP 19
-----------------------------------------------------------------------------------
• NOTE: It is recommend to perform
this step with two people.
• Partially insert the hopper into the
rectangular hole on the left side of the
grill body.
• Attach the temperature sensor
connector, then insert the hopper all
the way into the main body, ensuring
the wire is not pinched.
NOTE: After connecting the
temperature sensor cable feed all of
it into the hopper body as you push
the hopper closer on to the main
body. Ensure the cable is not pinched
between the hopper body and the
main body.
• Attach the hopper to the body using three
Screws (H) paired with Washers (B) and Lock
Washers (C). It is recommended to perform this
step with two people, one person to hold the
hopper up while the other person installs the
screws. Installing the top two screws first will
make things easier.
B
x3
C
x3
H
x3
Loading ...
Loading ...
Loading ...