Loading ...
Loading ...
Loading ...
Error Codes
Faults/errors in the program or machine are
indicated by a numerical error code on the panel
display.
Some error codes are cleared automatically when
the Start button is pressed to restart the machine
and some clear when the lid is opened.
For the other error codes, a service technician must
be called.
Fault Codes
4:1
Error Code Cause/Action
Err1 Lid switch status mismatch. One of the lid switches indicates the lid is
closed, and the other one indicates the lid is open. Check lid switch sensor
and under-lid magnets.
Err2 Drain error. Water was not completely emptied in 16 minutes. Check the
pump strainer for a clog.
Err5 Water level not reached within Time-out period during lling. Check water
inlet screens for debris or clog. Check that the water supply is turned on.
Err8 Water Level above parameter set for safety during a wash program.
Pump activates automatically. Check that the water-inlet valves turn o
when the machine is idle.
Er10 Water level sensor error. The water-level sensor might require replacement.
Call a qualied service technician.
Er11 Accelerometer sensor error. Call a qualied service technician.
EuAr Communication error between display and power modules. Call a qualied
service technician.
Unb Load cannot be balanced during extraction. Raise the lid and manually and
evenly redistribute the clothes in the drum. Close the lid and press Start
within ve minutes of opening it. If the lid is not re-closed within ve minutes,
the machine returns to idle mode.
Lid Both lid switches indicate the lid is open.
Loading ...
Loading ...
Loading ...