Loading ...
Loading ...
Loading ...
INSTALLATION - 3791477A886/A
e
competent technician.
• The minimum clearance between exhaust
hoods and the cooking surface must be at
least the distance indicated in the exhaust
hood installation instructions.
• The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the assembly
instructions.
• If the appliance is to be installed above an
oven, the oven must be fitted with a cooling
fan.
Appliance overall dimensions (mm)
Built-in cabinet dimensions (mm)
*If there is a piece of furniture above the
hob. In the case of a hood refer to
to the dimensions indicated in the relevant
manual.
Hob seal
To prevent leakage of liquid between the frame
of the hob and the countertop, place the
adhesive seal provided along the entire outer
edge of the hob before assembly.
Mounting
Over built-in oven unit
The clearance between the hob and the kitchen
units or other built-in appliances must be enough
to ensure sufficient ventilation and air discharge.
If installed above an oven, a space must be left
between the bottom of the hob and the top of
the appliance installed below.
On neutral compartment
If there are other pieces of furniture under the
hob, a double-layer wooden base must be
installed at least 20 mm from the bottom of the
hob to avoid any accidental contact. It must
only be possible to remove the double-layer
L
60 cm models 600
72 cm models 720
Mod. (mm) X (mm) Y (mm)
600 560 - 564 482 - 486
700 560 - 564 482 - 486
A (mm) B (mm) C (mm)* D (mm) E (mm)
min 150 min 460 min 750 20÷60 min 50
Do not use silicone to secure the hob.
This would make it impossible to remove
the hob without damaging it.
1 Opens on bottom
2 Opens on bottom and back
Loading ...