Loading ...
Loading ...
Loading ...
10
Before using the oven for the first time
In this section, you can find out what you must do before
using your oven to prepare food for the first time. Read
the Safety information section beforehand.
Remove the appliance packaging and dispose of it
appropriately.
Setting the time
After connecting the oven or after a power failure, ‹:‹‹
and auto will blink on the display.
1.
Hold the TIMERS button down until the colon blinks on
the display.
2.
Set the current time with the @ and A buttons. Hold the
@ or A button down to change the value faster.
The time set is taken over after 5 seconds.
Setting the time during operation
1.
Hold the @ and A button down until the colon blinks
on the display.
2.
Set the current time with the @ and A buttons. Hold the
@ or A button down to change the value faster.
The time set is taken over after 5 seconds.
Baking out the oven
Pre-cleaning the oven
1.
Remove the accessories and the hook-in racks from
the cooking compartment.
2.
Completely remove any leftover packaging, e.g. small
pieces of polystyrene, from the cooking compartment.
3.
Some parts are covered with a protective film. Remove
this scratch protection film.
4.
Clean the outside of the appliance with a soft, damp
cloth.
5.
Clean the cooking compartment with hot soapy water.
Heating up the oven
To remove the new smell, heat up the oven when it is
empty and closed.
1.
Turn the function selector to the Bake operating mode.
2.
Turn the temperature selector to the maximum
temperature.
3.
Switch the oven off after 40 minutes.
Re-cleaning the oven
1.
Clean the cooking compartment with hot soapy water.
2.
Refit the hook-in racks.
Cleaning the accessories
Before using the accessories, clean them thoroughly
using a cloth and warm soapy water.
Operation
Switching on the oven
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature.
The oven begins to heat up.
Switching off the oven
Turn the function selector and temperature selector to
the off position.
Changing settings
The heating function and temperature or broil setting can
be changed at any time using their respective selectors.
Heating up
In order to preheat the oven as quickly as possible, use
the "Conv Bake" oven mode.
When the set temperature has been reached and the
indicator light has turned off, set the desired oven mode.
Note: Once the set temperature is reached, the indicator
light will turn on each time the oven is powered to
regulate this temperature.
Kitchen timer
The short-term timer has no influence on the functioning
of the oven. The duration of the short-term timer can be
set from 1 minute to 23 hours and 59 minutes.
1.
Hold the TIMERS button down until the † blinks and
‹:‹‹ is displayed.
2.
Set the desired duration with the @ and A buttons.
The set time is taken over after 5 seconds.
After the time has elapsed, a signal sounds and the †
symbol blinks.
Note: While the short-term timer is running, the time is
displayed and the † symbol lights up continuously.
Changing the set time:
To change the remaining time, hold the TIMERS button
down until the † symbol blinks on the display. Then
change the remaining time with the @ and A buttons.
Canceling the short-term timer
To delete the setting, hold the TIMERS button down until
the † symbol blinks on the display.Then press the @ and
A buttons simultaneously.
Loading ...
Loading ...
Loading ...