Loading ...
Loading ...
Loading ...
User’s Manual
45
Exception
Select the event type, and select Enable to enable the handling of corresponding abnormal
events.
Configure parameters. For details, see Table 5-3.
Table 5-3 Abnormality parameters description
Parameter Description
Event Type
You can configure the corresponding abnormal events on following three tabs.
Disk: To set the ways to handle abnormal Disk events, including No Disk, HDD
Error, Low Space.
User: Includes illegal login.
Device: To set the ways to handle abnormal device events, including High
Temperature, Battery Low Space, Network Security Exception, Over Speed,
Low Speed, Collision, Turnover, and ACC Power Off.
The supported event type might be different depending on the model you
purchased, and the actual interface shall prevail.
Capacity Limit
Select Disk tab, and if the Event Type is Low Space, configure this parameter.
You can set the percentage of HDD remaining space. When HDD remaining
space is lower than this percentage, an alarm will occur.
Attempt(s)
If the Event Type is Illegal Login, configure this parameter.
The maximum number of allowed password input errors during user login. If the
number of password input errors reaches this value, the user account will be
locked.
Lock Time
If the Event Type is Illegal Login, configure this parameter.
If the number of password input errors reaches this value, the user account will
be locked.
Loading ...
Loading ...
Loading ...