Loading ...
Loading ...
Loading ...
Turning the TV On and Off
Press the POWER(b button on the remote control.
You can also use the POWERd) button on the TV.
/ POWER
SOURCE
Plug & Play Feature
When the TV is initially powered on_basic settings proceed automatically and
subsequently.
>- The Screen Saver is activated if there is no remote control key input for longer than 1
minute while "Plug & Play' is running.
>The Screen Saver is activated if there is no operating signal for longer than 15
minutes.
1. Press the POWER(b button on the remote control.
The message "Menu Language_ Store Demo_Channels and Time wilt be set." is
displayed.
Press the ENTER _ button, then "Select the language of the OSD" menu
is automatically displayed.
2=
3=
Press the A or _' button to select language, then press the ENTER _ button.
The message "Select 'Home Use' when installing this TV in your home." is
displayed.
Press the 4 or 1_ button to select "Store Demo_ or "Home Use", then
press the ENTER _ button.
The message "Select the antennas to memorize." is displayed.
>_ We recommend setting the TV to "Home Use' mode for the best picture in your
home environment.
>* "Store Demo" mode is only intended for use in retail environments.
>* If the unit is accidentally set to "Store Demo' mode and you want to return to
"Home Use" (Standard): Press the Volume button on the TV. When the volume
OSD is displayed_ press and hold the MENU button on the TV for 5 seconds.
4= Press the ,_ or ,lr button to memorize the channels of the selected connection.
Press the ENTER _ button to select "Start'.
:"--Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air' and "Cable' antenna signals.
>_ In Cable mode_you can select the correct signal source among STD, HRC, and
IRC by pressing the A, _', 4 or _- button, then press the ENTER _ button.
If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable
system that exists in your particular area.
5. The TV will begin memorizing alt of the available channels.
>To stop the search before it has finished, press the ENTER _ button with "Stop"
selected.
:_Afler all the available channels are stored, it starts to remove scrambled
channels (see page 28). The Auto program menu then reappears.
Press the ENTER _ button when channel memorization is complete. The
message "Set the Clock Mode." is displayed.
Loading ...
Loading ...
Loading ...