Loading ...
Loading ...
Loading ...
19
7.
Continue frothing the milk for a few seconds more until there is no steam left. Then, turn
the steam control knob to its OFF position. CAUTION: Turning the steam control knob
OFF before exiting steam mode can trap steam in the unit and cause it to temporarily
overheat. If this happens, the SINGLE-SHOT, DOUBLE-SHOT, and MANUAL coee buttons
will blink rapidly. Allow the unit to cool until these buttons are all solidly lit before using the
unit again.
8.
Immediately wipe the steam wand of milk residue.
9.
Serve by pouring the frothed milk into your drink of choice.
HOW TO USE THE STEAM WAND FOR HOT WATER
The steam wand also dispenses hot water, perfect for warming your cup before pulling your
espresso shot.
1.
With the unit heated and in standby mode (see steps 1 and 2 of HOW TO FROTH MILK on
p. 18), place a large heatproof cup underneath the steam wand, making sure the nozzle is
below the rim to prevent splashing.
2.
Slowly turn the steam control knob counterclockwise as if to produce steam. This will
open the nozzle so water can flow out.
3.
Press the SINGLE-SHOT, DOUBLE-SHOT, or MANUAL coee button. The chosen button
will remain lit and hot water will dispense from the steam wand in the amount of the
chosen button (about 1–1.5 fl oz for single, 2–2.5 fl oz for double, and up to 5.25 fl oz for
manual).
4.
When the water has finished dispensing, the unit will automatically return to standby
mode. Turn the steam control knob to its OFF position.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...