Loading ...
Loading ...
Loading ...
EN
7. Assembly Instructions
7.4 Attach the Benchtops
1. Place the rear benchtop (E) onto the rear U-brackets
so that the eight small holes align with the brackets
and the notch is on the inside edge.
2. Screw eight 5mm x 16mm self-tapping screws (K) up
through the brackets and into the benchtop.
7.5 Finishing Touches
1. Tighten all bolts and screw xings using the
spanner supplied.
Important: The nylon inserts inside the nuts should
be broken when securely tightened. This provides
additional security against the accidental loosening
of bolts during use.
2. Insert the clamp blocks into the benchtop
as required.
Important: When complete, the folding braces between
the front and rear legs should be on the outside of the
frame and should fold upwards when the workbench
is closed.
Important: LOOSELY insert all eight screws before
tightening them to ensure that all of the holes
align correctly.
3. Repeat these steps for the front benchtop (D),
keeping the ruled edge towards the crank handles.
5 Fig.
7 Fig.
6 Fig.
– 9 –
(E)
(K)
Loading ...
Loading ...
Loading ...