Loading ...
Loading ...
Loading ...
– 10 –
EN
8. Operating Instructions
Important: Before using this product, read and understand
all the safety instructions listed in this manual.
8.1 Unfolding and Folding the Workbench
1. To unfold the workbench:
a. Pull the front and rear legs apart.
b. Press down on the folding braces (7) to lock the
legs in position.
2. To fold the workbench away:
a. Ensure that the crank handles are not in the
downward position so as not to damage or obstruct
the legs when folding.
b. Lift the folding braces (7) upwards to unlock
the legs.
c. Push the front and rear legs together until the
workbench is fully closed.
8.2 Clamping a Workpiece
Workpieces can be clamped directly between the
benchtop pieces or between the clamp blocks.
The clamp blocks can be repositioned as required to
accommodate workpieces of varying shapes and sizes.
The notches in the benchtop pieces can be used to grip
pipes and tubing.
1. Position the clamp blocks (5) in the appropriate holes
of the benchtop as required.
2. Use the crank handles (2) to separate or bring
together the benchtop pieces as appropriate to grip
the workpiece:
– To separate the benchtop pieces, turn both crank
handles anticlockwise.
– To bring the benchtop pieces together, turn both
crank handles clockwise.
8 Fig.
Important: Adjust both crank handles together to open
or close the benchtop evenly.
The crossbars may be used to store tools.
(7)
Loading ...
Loading ...