Loading ...
Loading ...
Loading ...
Day Counter
You can create up to five Day Counter records
and specify a title (eight characters) and a date
(year, month, day) for each record. After that,
each Day Counter record will show the
number of days from the current date to the
record date.
●
If the date of a Day Counter record is a future
date, the watch displays the number of days
remaining until the record date is reached.
●
If the date of a Day Counter record is a past
date, the watch displays the number of days
since the record date.
When the Timekeeping Mode calendar
matches a Day Counter date, [DAYS] flashes
on the display in the Timekeeping Mode and
Day Counter Mode to notify you.
Note
●
The factory default settings for all five
Day Counter records are blank title and
the date January 1, 2001.
Assigning a Title and Date
1. Enter the Day Counter Mode.
l
Navigating Between Modes
2. Use (B) and (D) to select the Day Counter
record you want to configure.
3. Hold down (A) for at least one second.
The first character of the record’s title will
flash.
Ye a r
First character of title
Month Day
4. Use (B) and (D) to display the character
you want to input.
●
Holding down (B) or (D) scrolls through
settings at high speed.
5. Press (C).
●
This causes the flashing to move to the
right.
●
From the eighth character of the title, the
flashing cursor moves to the year, then
the month, then the day.
6. Repeat steps 4 and 5 to configure other
title and date settings if you want.
Note
●
You can enter up to 8 characters for the
title. Allowable input characters for the
title are: spaces, alpha characters (A to
Z), symbols (., -), and numbers (0 to 9).
●
The input range for the year setting is
1950 to 2049.
7. Press (A) to complete the setting
operation.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Viewing Assigned Data
1. Enter the Day Counter Mode.
l
Navigating Between Modes
2. Press (B) or (D).
●
Each press of (D) scrolls forward
through the five pages. (B) scrolls back.
●
A name with more than three characters
scrolls from right to left. An end symbol
indicates the end of a title.
Year, month, day
Number of days
Title
Deleting Day Counter Data
1. Enter the Day Counter Mode.
l
Navigating Between Modes
2. Use (B) and (D) to display the data you
want to delete.
3. Hold down (A) for at least one second.
The first character of the record’s title will
flash.
4. Press (B) and (D) at the same time.
This displays [CLR], replaces the
selected record with the current date, and
leaves the title blank.
5. Press (A) to complete the delete
operation.
Watch Operation Guide 3531
13
Loading ...
Loading ...