Casio BG-169PB

User Manual - Page 11

For BG-169PB.

PDF File Manual, 15 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
Setting the Time
The countdown start time can be set in 1-
minute units up to 24 hours.
If a timer countdown operation is in
progress, reset the timer to its current start
time before performing this operation.
l
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Hold down (A) for at least one second.
This causes the hours digits to flash.
Hours
3. Use (B) and (D) to change the timer hours
setting.
Holding down (B) or (D) scrolls through
settings at high speed.
4. Press (C).
This causes the minutes digits to flash.
Minutes
5. Use (B) and (D) to change the timer
minutes setting.
6. Press (A) to complete the setting
operation.
Note
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Setting a start time of “0:00” will
perform a countdown of 24 hours.
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
Hour, minute, second
2. Use the operations below to perform a
timer operation.
D
D
D
(Time up)
Resume
Pause
(Countdown starts)
Start
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
You can reset a paused countdown to
its start time, by pressing (B).
3. Press any button to stop the tone.
Data Bank
The watch can store up to 25 records that
include a name (8 characters) and a phone
number (12 digits). Records are automatically
sorted alphabetically on the names.
Inputting Data
1. Enter the Data Bank Mode.
l
Navigating Between Modes
2. Use (B) and (D) to select a blank page.
Note
When you enter the Data Bank Mode,
the number of remaining data records
appears on the display. If no more data
records remain, delete data you no
longer need to make room for new
data.
l
Deleting Data
3. Hold down (A) for at least one second.
This causes the first character of the name
to flash.
Watch Operation Guide 3531
11
Loading ...
Loading ...
Loading ...