Loading ...
Loading ...
Loading ...
The operation of any lawn mower can result in foreign objects thrown into
the eyes, which can result in severe eye damage. Always wear safety
glasses or eye shields while operating your tawn mower or performing any
adjustments or repairs. We recommend standard safety glasses or a wide
vision safety mask worn over spectacles,
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED CONTROL
MODELS WITH REMOTE THROTTLE
Engine speed is controlled by the throttle
control located on the upper handle.
• Move lever forward to FAST engine
speed for starting and better bagging.
• Move Sever backward for SLOW engine
speed.
• Some models have engines equipped
with a choke feature. Move the lever all
the way forward to the CHOKE position
when starting a cold engine.
NOTE: Be sure engine START!STOP
switch (if equipped) is in the ON position.
SLOW
FAST .- ..
"_ slJ _J I,, tl
//"-_ I I i -
,.//I ,'J i
_,, _v _
,,___/" r / -""- Remote
throttle
_z control
MODELS WITH FIXED SPEED ENGINES
Engine speed was set at the factory for
optimum performance. Engine speed is
not adjustable.
TO ADJUST CUTTING HEIGHT
ALL MODELS:
Adjust cutting height to suit your require-
ments. Medium position is best for most
lawns. Raise wheels for low cut and lower
wheels for high cut.
NOTE: For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same cutting height.
"MAN UAL" ADJUSTMENT
• Remove wheel, bolt, and hardware and
reassemble in desired adjustment hob.
• Reinstall wheel components in the same
order as they were before removai.
Tighten securely,
• Make sure all wheels are at same height.
Rat washer
Bolt
3/8-16
Spacer Locknut
"QUICK" ADJUSTMENT
• To change cutting height, squeeze adjuster
lever toward wheel. Move wheel up or
down to suit your requirements. Be sure
all wheels are in the same setting,
NOTE: Adjuster is properly positioned when
plate tab inserts into hole in lever. Also, 9-
position adjusters (if so equipped) allow lever
to be positioned between the plate tabs.
LEVER BACKWARD Plate tab
TO LOWER MOWER
LEVERFORWARDTO RAISEMOWER Lever
9
Loading ...
Loading ...
Loading ...