Loading ...
Loading ...
Loading ...
INSTALL REAR WHEELS
("HIGH WHEEL" MOWERS ONLY)
Some high wheel models require washers
which will be provided in a parts bag. tf
provided, instali washers on the axle first
as shown.
* Install one (1) rear wheel on the axle of
rear wheel adjuster.
, Install 3/8-16 locknut and tighten se-
curely.
, Repeat procedure for other rear wheel.
Axle
O-Ring
Flanged
Iocknut assembly
ASSEMBLE GRASS CATCHER
(REAR DISCHARGE MOWERS ONLY)
IMPORTANT: If your model lawn mower
is mulcher ready, the mu]cher plate or plug
must be removed before using mower as
a bagger. To convert mower to bagging or
discharging, see the Operation section in
this manual.
Look at the different grass catcher illustra-
tions that follow. Determine which type
of grass catcher you have and folIow the
appropriate instructions.
"FABRIC TOP" GRASS CATCHERS
TO ASSEMBLE AND ATTACH GRASS
CATCHER
• Put grass catcher frame into grass bag
with rigid part of bag on the bottom.
• Slip vinyl bindings over frame.
NOTE: if vinyl bindings are too stiff, hold
them in warm water for a few minutes. If
bag gets wet, let it dry before using.
• Lift the rear door on the mower housing.
• For HINGE BRACKET mounted catcher,
place the grass catcher frame onto the
formed tabs on the rear door hinge
bracket.
"_--" Rear door
bracket
Grass
catcher
frame
---_..
Formed tabs
• For HANDLE BRACKET mounted
catcher, place frame side hooks into
slots in handle brackets.
Handle bracket hooks Rear
Grass
catcher
handle
Catcher frame side hook
Loading ...
Loading ...
Loading ...