GE - General Electric PDCS1NBXARSS Official GE Bottom-mount Refrigerator

User Manual - Page 4

For PDCS1NBXARSS.

PDF File Manual, 140 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Aboutthe controlswith temperaturesettings.
(onsomemodels)
[]
[]
TEMPERATURE SET
WARMER _ _WARMER
COLDER COLDER
o o F Recommended 37_F Recommended
[]
[] []
Hold 3 seconds to _set NoEd 3 seconds
(onsomemodels)
NOTE: Therefrigeratoris shipped with protective film covering the temperaturecontrols.
If this film was not removedduringinstallation, removeit now
The temperature controls are preset in the factory at 37°F for the refrigerator compartment
and O°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the SET temperature based on usage and operating environment.
Setting either or both controls to OFFstops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
4
Changing the Temperature
For Controls-on-the-DoorModels:
To change the temperature, press and release the
WARMER or COLDER pad. The ACTUAL TEMPlight
will come (m and the display will show the actual
temi)eramre. To change the temperature, tap
either the WARMERor COLDERpad until the
desired temperature is displayed.
For ControlsInside the Refrigerator:
Opening the door displa):s the actual temi_eramre.
To change the temi)eramre, press either the
WARMER or COLDER touch pads until the
desired temperature is displayed.
Once the desired temperature has been set,
the temperatm'e display will return to the actual
refi-Jgei'ator and fl'eezer temperattlres afiei" 5
seconds. Several ac!iusmlents may be required.
Each time )ou ac!iust controls, allow 24 horns fi_r the
refrigerator to reach the temperature you ha_e set.
To turn the coolingsystem off, trip the WARMER pad
fro"either the refligerator or the fl'eezer until the
display shows OFF. To turn the unit back on, press tile
COLDER pad for either the refligerator or fl'eezei:
Then press the COLDER pad again and it will go to
the preset points of O°Ffi)rthe fl'eezer and 37°Ffi)r
the refiigeratoi; Setting either or both controls
to OFFstops cooling ill both the fl'eezer and
refligerator conq)artments, but does not shut
off electrical power to the refl_igeratoi:
Loading ...
Loading ...
Loading ...