Loading ...
Loading ...
Loading ...
EN
W415-4053 / A / 03.23.22
11
installation
Wall
Wall
2.5 installation instructions
1. Select a location that is not prone to moisture and is located at least 36” (91.4cm) away from combustible
materials, such as curtains, drapes, furniture, bedding, paper, etc.
2. Have two people hold the appliance against the wall to determine its fi nal location.
3. Place the appliance face down on a soft, non-abrasive surface. Remove the bracket from the back of the ap-
pliance by removing the screws (Fig. 2-1). Set the bracket aside and discard the screws.
4. Mark out the location, then mount the bracket onto the wall using screws (supplied). This bracket MUST have
the hooks facing upward and it MUST be level (Fig. 2-2).
Due to the many different materials used on different walls, it is highly recommended that you consult your local
builder before installing this appliance on the wall.
It is strongly recommended that the mounting bracket be screwed into the wall studs where possible. If the wall
studs cannot be used, ensure that the supplied plastic anchors are used to affi x the bracket to the wall and that
the bracket is adequately secured.
note:
5. With the wall-mounting bracket installed, have two people lift the appliance up and insert the hooks on the
bracket into the slots on the back of the appliance (Fig. 2-3).
6. Install the MDF bracket (supplied) to the bottom of the appliance by removing the unpainted existing screw in
the centre of the appliance and then reinstalling it with the MDF bracket (Fig. 2-4).
x 6
x 6
Fig. 2-1
Fig. 2-2
Fig. 2-3
Wall
Fig. 2-4
MDF
Bracket
Loading ...
Loading ...
Loading ...