Loading ...
Loading ...
Loading ...
Faxing problems
Caller ID is not shown
Note: These instructions apply only to printers that support analog fax. For more information, see
“Setting up
the printer to fax” on page 61.
Action Yes No
Enable caller ID.
From the control panel, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Admin
Controls > Enable Caller ID
For non-touch-screen printer models, press
to navigate
through the settings.
Does the caller ID appear?
The problem is
solved.
Contact
customer
support.
Cannot send or receive faxes using analog fax
Action Yes No
Step 1
Resolve any error messages that appear on the display.
Can you send or receive a fax?
The problem is
solved.
Go to step 2.
Step 2
Make sure that the cable connections for the following equipment
are secure:
• Telephone
• Handset
• Answering machine
Can you send or receive a fax?
The problem is
solved.
Go to step 3.
Step 3
Check for a dial tone.
• Call the fax number to check if it is working properly.
• If you are using the On Hook Dial feature, then turn up the
volume to check if you hear a dial tone.
Can you hear a dial tone?
Go to step 5. Go to step 4.
Troubleshooting 250
Loading ...
Loading ...
Loading ...