Loading ...
Loading ...
Loading ...
SYSTEM SETUP FOR DVD MODE
Setup
Follow the steps below to check the connection:
1. Turn on the TV and shift to “VIDEO INPUT”.
2. Turn on other units such as an audio or VCR if they are connected.
Turning the Unit On:
1. Press the POWER button on the panel. The DVD player will automatically read a disc if it has already been
inserted in the player.
2. Press the OPEN/CLOSE button to open the disc tray to insert or replace a disc.
3. Insert a disc onto the disc tray and press OPEN/CLOSE button again to close the disc tray. The screen will
display what type of disc is being played.
4. The DVD player will select the state of play according to the disc format.
DIS C FORMAT STATE OF PLAY
CD/ MP3 First track.
DVD/VCD/SVCD with PBC
From the menu screen, press the PBC
button on the panel or on the remote
control to play back from the beginning.
DVD/VCD/SVCD without PBC Automatically plays from the beginning.
Note: PBC is the abbreviation for PLAYBACK CONTROL. If a disc has PBC, it means that it has a menu from
where you are able to choose a track, chapter or other instruction at the beginning of playback.
ACTION
BUTTON ON
PANEL
KEY ON REMOTE
CONTROL
Play PLAY/PAUSE PLAY
Pause PLAY/PAUSE PAUSE
Next track or
chapter
NEXT NEXT
Previous track or
chapter
PREV PREV
Stop STOP STOP
Turning the Unit Off:
Press the STOP button, then press the OPEN/CLOSE button to open the disc tray. Remove the disc and close the
disc tray by pressing the OPEN/CLOSE button again. Then press the POWER button to turn off the player. It is
recommended that discs are removed before the player is turned off. Remove the plug from the outlet on the wall if
the player will not be used for a long time.
Loading ...
Loading ...
Loading ...