Loading ...
Loading ...
Loading ...
LAUNCH
51
10 FAQ
1. How to save power?
• Please turn off the screen while the tool keeps idle.
• Set a shorter standby time.
• Decrease the brightness of the screen.
• If WLAN connection is not required, please turn it off.
• Disable GPS function if GPS service is not in use.
2. How to connect the non-OBD II vehicle diagnostic socket?
1) Select the appropriate adaptor from the non-16pin adaptor kit (sold
separately) according to the vehicle’s DLC port type (4).
2) Loosen the captive screws of the HDB15F to HD15F data cable (2) and
disconnect the HD15M to OBD16 adaptor (3) from the data cable.
3) Connect the data cable (2) with the target adaptor on the above figure and
tighten the screws. Other steps shall also apply.
4. Communication error with vehicle ECU?
Please confirm:
1. Whether the VCI is correctly connected.
2. Whether ignition switch is ON.
3. If all checks are normal, send vehicle year, make, model and VIN number to
us using Feedback feature.
5. Failed to enter into vehicle ECU system?
Loading ...
Loading ...
Loading ...