Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
For your own safety, never connect plug to power source
outlet until all assembly and adjustment steps are
completed, and you have read and understood the safety
and operating instructions.
TOOLS NEEDED
Slotted ,screwdriver
Combination wrench
L' '"
Framingsquare Socketwrench
with23 mm.socket
8" & 10" Adjustable v,l_mches
Combinationsquare
INSTALUNG THE TABLE (FIG. B and C)
1. Locate the table crank (1) and support lock (2) from
the loose parts beg.
2. Insert the support lock handle intothe hole (3) at the
rear of the table supportassembly. Tighten by hand.
3. Install the table crank handle onto the small
shaft (4), aligningthe set screw (5) withthefiatsurface
of the shaft. Tighten the set screw with a hex wrench.
Fig. B
3
4
The Ddll Press is very heavy and MUSTbe liftedwith
the help of 2 PEOPLE OR MORE, to safely assemble it.
4. (RG, C) Loosen the support lock (2). Raise the
table arm assembly by tuming the crank handle (1)
clockwise.Tighten he support lock.
5. Place the table 6) in the table arm asse bly. Tighten
the table lock handle (7).
COLUMN SUPPOFITTO BASE (FIG. A)
1. Posltionthe base (1) on the floor. Fig.C°
2. Place the column (2) on the base, aligning the
holesin the column supportwith the holes in the base.
3. Locate the four long hex bolts (3) from the loose
parts bag.
4, Place a bolt in each hole through the column
support and the base, Tighten with an adjustable
w:nch.
Fig. A
• 2
i
I
Loading ...
Loading ...
Loading ...