Loading ...
Loading ...
Loading ...
7
Unpacking
Carton Contents
• Electric blower/vacuum/mulcher
• Collection bag
• Supporting shoulder strap
• Manual with registration card
1. Carefully remove the electric blower/vacuum/mulcher and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric blower/
vacuum/mulcher. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils or
small parts. These items can be swallowed and pose a
suocation risk!
Assembly
m
WARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Shoulder Support Strap
Fitting + Adjusting
1. Clip the shoulder support strap to the strap hook on the
top of the blower, as shown (Fig. 1).
2. To adjust the length of the strap, push it from one end to
form a loop above, and let out as needed, then pull the
strap from the other side to tighten (Figs. 2 – 3).
3. With machine on operator's right hand side, place
shoulder strap across chest and over left shoulder.
Collecting Bag Assembly
1. Insert the buckle of the support frame into the slot of the
housing. The frame will click into position when properly
tted (Fig. 4).
Fig. 1
Shoulder support
strap
Strap hook
Fig. 2
Fig. 3
Fig. 4
Loading ...
Loading ...
Loading ...