Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in different countries, the
trademark is . With regard to the other trademark, service logo, domain, icon
and company name mentioned in this manual, they shall all belong to AUTOOL and its other
affiliated company, in other countries without the registration yet of these trademark, service
logo, domain name, icon and company name of AUTOOL, here we announce they are
owned by AUTOOL. Any company or person shall not use the trademark, service logo,
domain name, icon and company name of AUTOOL before getting approved by AUTOOL
with written certificates. Please visit our website www.autooltech.com or email at
aftersale@autooltech.com to contact us.
1. Caution
Non- technical person shall not change, disassemble or repair the product, otherwise
all losses caused by this shall be bared by the user himself.
This product is powered by electricity and should not be used as a toy for children.
To avoid short circuit, do not immerse the product in water or other liquid.
Please try to use the power supply and power cord supplied by manufacturer as
standard.
Please do not expose this product to strong light or high temperature when it’s not at
use.
Keep away from smoke-sensitive parts for leak detection, for example- the headlight.
When you use this detector the first time, please fill 20-30ml oil, not beyond this
range.
Fresh oil can be filled only when the smoke is light, do not add test oil excessive to the
volume of the measuring bottle at one time, 15ml each time will be good enough.
Otherwise the smoke outlet equipment will be affected.
Replace the detector oil regularly. Before filling fresh oil, please pour out the old
remaining oil in the detector.
Detector oil selection : Liquid paraffin and baby oil are all OK. But please make sure
there is no water inside, and sticky liquid is forbidden.
The test equipment has a temperature protector. If the machine is operated
continuously for a long time, it will automatically stop and protect after overheating.
Meanwhile, the air pump works normally, the heating system stops working, and when
the temperature drops to a reasonable temperature, the equipment resumes normal
operation. If you need to work continuously, after 15 minutes of work, the equipment
shall be shut down for 3-5 minutes.
User can use strong airflow for the outside of the device to cool it down, but do not
directly use liquid to dissipate heat.
2. Getting Started
AUTOOL SDT 106 is a professional auto pipe leak detect tool. It will help user to position
leakage on any pipe system quickly and exactly,such as EVAP system, intake system,
Loading ...
Loading ...
Loading ...
