Loading ...
Loading ...
Loading ...
Installation
Waiting time
To the maintenance-free lubrication oil is located in
the capsule of the compressor. This oil can get
through the closed pipe system during slanting
transport. Be-fore connecting the appliance to the
power supply you have to wait at least 2-5 hours
so that the oil runs back into the capsule.
2-5 h
Electrical connection
Before each connection check if:
Power supply, socket and fusing are appropriate to the rating plate.
The power socket is earthed and no multi-plug or extension.
The power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service(see
warranty card.
Removing and installing the doors
In the event that you need to remove the appliance doors,please follow the door
removal and installation instructions below.
WARNING!
Before and operation, deactivate the appliance and disconnect the mains plug
from the mains socket.
The appliance is heavy.Always handle with at least two persons.
Do not tilt the appliance more than 45° or place it horizontally on the ground.
1.Undo the hinge cover screw and remove the
cover. Release the cable connector.
34
Loading ...
Loading ...
Loading ...