Loading ...
Loading ...
Loading ...
9
RANGE HOOD USE
The range hood is designed to remove smoke, cooking
vapors,and odors from the cooktop area. For best results,
startthe hood before cooking and allow it to operate several
minutes after the cooking is complete to clear all smoke and
odors from the kitchen.
The hood controls are located on the front panel of
therangehood.
Range Hood Controls
Operating the light
Press the light switch to the left to turn the light On.
Press the light switch to the right to turn the light Off.
IMPORTANT: Flicker and visual uctuation can be present every
time the lamp switch is activated. The duration of the icker will
depend on the manner and velocity that the light switch changes
position.
Operating the fan
The fan has 2 speeds.
Press the fan switch to the left for Low speed.
Press the fan switch to the right for High speed.
Return the fan switch to the center to turn the fan Off.
RANGE HOOD CARE
Cleaning
IMPORTANT: Clean the hood and grease lters frequently
according to the following instructions. Replace the grease
lterbefore operating hood.
Exterior Surfaces
IMPORTANT: Do not use soap-lled scouring pads,
abrasivecleaners, cooktop polishing creme, steel wool,
grittywashcloths, or paper towels.
To avoid damage to the stainless steel, do not use cleaners
thatcontain chlorine.
Cleaning Method:
■ Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with a soft, lint-free cloth.
■ Glass cleaner to remove ngerprints.
■ For stainless steel models, rub in the direction of the
graintoavoid scratching or damaging the surface.
■ For stainless steel models, use Stainless Steel Cleaner
andPolish, Part Number 31462A (not included):
See the “Assistance or Service” section to order.
Charcoal Grease Filter
To Remove the Filter:
1. Remove the screw from the grease lter retainer.
2. Turn the grease lter retainer to release the lter.
3. For non-vented (recirculating) installations: The charcoal
lter is not washable. It should last up to 6 months with
normal use. For information on ordering, see the “Assistance
or Service” section. Dispose of the old charcoal lter.
To Replace the Filter:
1. To reinstall the lter, place the back edge of the lter into the
channel at the rear of the hood. Push the lter into place and
turn the lter retainer to secure the lter to the range hood.
2. Replace the screw in the grease lter retainer.
Replacing the Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and remove it from the hood.
3. Screw a 120 V, 75 W maximum, light bulb with
E26baseintothe socket.
4. Replace the lens cover by squeezing the cover
andinsertingthe tabs into the slots.
5. Reconnect power.
If the new light does not operate, make sure the light bulb
isinserted correctly before calling service.
A
C
B
A. Light housing and cover
B. Grease lter retainer
C. Grease lter
A
B
Off
On
Low
Off
High
A. On/Off light switch
B. Fan speed switch
A
A. Filter retainer
Loading ...
Loading ...
Loading ...