Loading ...
Loading ...
Loading ...
8
8. Mount Range Hood
■ Lift the range hood into place, positioning the rear slots
overthe mounting brackets.
■ Using a Phillips screwdriver, push on the screws that
arestarted into the top mounting tabs and bend the
tabsagainst the cabinet side walls. Attach the screws
tothecabinet side walls.
IMPORTANT: Do not overtighten the screws.
■ For direct wire installations, run the home power supply
cable according to the National Electric Code or CSA
standards and local codes and ordinances. There must
beenough wiring from the fused disconnect (or circuit
breaker) box to make the connection in the range hood
electrical terminal box.
■ Tighten the strain relief screws.
NOTE: Do not reconnect power until the installation
iscomplete.
OPTIONAL: If you prefer, bend the rear tabs against
therearof the range hood and attach to the wall using
#8-18x 5/8" (4.2 x 16 mm) truss-head screws.
9. Make electrical connection
Option 1 - Direct Wire Installations
■ Use a UL listed/CSA approved wire connector
andconnectthe 3 white wires (A) together.
■ Use a UL listed/CSA approved wire connector
andconnectthe 2 black wires (B) together.
■ Connect the green (or bare) ground wire (C) from the
powersupply to the green ground screw in the electrical
boxand tighten the screw securely.
Reinstall the electrical box cover.
Reconnect power.
Option 2 - Power Cord Kit Installations
For optional power cord kit installations, follow the instructions
supplied with the power cord kit. See the “Assistance or
Service” section for information on ordering.
NOTE: Use only with range hood cord connection kits that
havebeen investigated and found acceptable for use with
thismodel range hood.
10. Complete the installation
■ Install a 120 V, 75 W maximum, light bulb with
E26 base.See “Replacing the Light Bulb”in
the“RangeHoodCare”section.
■ If removed previously, replace the lter. See “Charcoal
GreaseFilter” in the “Range Hood Care” section.
■ Check the operation of the range hood fan and light.
Seethe“Range Hood Use” section.
If the range hood does not operate, check to see whether
acircuit breaker has tripped or a household fuse has blown.
Disconnect the power and check the wiring connections.
NOTE: To get the most efcient use from your new
rangehood,read the “Range Hood Use” section.
A
B
C
WARNING
Fire Hazard
Electrically ground the blower.
Use copper wire.
Connect ground wire to green ground screw in
terminal box.
Failure to do so can result in death, fire, or
electrical shock.
Loading ...
Loading ...
Loading ...