Loading ...
Loading ...
Loading ...
PAGE: 8 / 10
Attach the outer glass shade and the inner
glass shade onto the glass holder, secure
them with socket ring, by supplied fixer.
Repeat until all of glass shades fixed.
Note: The outer glass shades should be
kept in center position while securing the
socket rings.
Install LED bulbs (included). See relamping
label at socket area or packaging for
maximum allowed wattage.
Optional: To avoid reflection of light, gently
place the inner glass shade covers onto the
top of the inner glass shades.
Fig.17
Fig.18
Fan Light
Light Kit Switch
Inner Glass Shade
Outer Glass Shade
Glass Holder
Socket
Ring
Fixer
Inner Glass Shade Cover
3-4W E12 Base G Type LED
Bulbs (included)
Set Screw & Washer
The slide switch on switch box sets direction of fan rotation. Select the
desired direction of fan rotation.
Push the slide switch down for "Forward" and up for "Reverse".
Note: Wait for fan to stop before reversing the direction of blade rotation.
Install two pull chains and drops onto the pull chains located in the switch
box and light kit.
The pull chain controls the fan speed as follows:
1 pull – High, 2 pull – Medium, 3 pull – Low, and 4 pull – Off.
To turn the light kit “ON” or “OFF”, pull the chain that is attached to the
light kit.
Caution: 1. If you install a remote control or a wall control for this fan,
pull the pull chains to “high speed” of the fan motor and
“on” of the fan light.
2. Compatible Wall Switches:
Menards SKU# 363-2615 / 363-5815.
Slide Switch
Reverse
Fig.19
Fig.20
Turn ON the electric power at the
main fuse or circuit breaker box.
Switch Box
Install pull
chains and
drops
Fan Light
Wire Connector
Fig.16
Fan Fixture Set
Make wire connection:
-- Connect the blue wire from
the
fan fixture set
to black
wire from the fan light with
wire connector.
-- Connect the white wire from
the
fan fixture set
to white
wire from the fan light with
wire connector.
E12 Base G Type
bulbs Max.60W
Remove the switch box screws from the switch box
cover first. Carefully put the wires into the fan fixture set,
then attach the fan light into the fan fixture set with the
switch box cover screws and washer.
Forward
220104
Loading ...
Loading ...