Loading ...
Loading ...
Loading ...
WARNING
• If parts of the machine are damaged, do not use
the machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
WARNING
For your personal safety, do not insert battery before
the tool is assembled completely.
8.2 ATTACH THE GUARD
WARNING
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a
Phillips screwdriver (not provided).
2. Put the guard onto the trimmer head.
3. Align the screw holes on the guard with the screw
holes on the trimmer head.
4. Tighten the screws.
8.3 ASSEMBLE THE SHAFT
1. Loosen the knob (1) on the coupler.
2. Push in the release button (2) on the lower shaft.
3. Align the release button with the positioning hole (3)
and slide the two shafts.
1
2
3
4. Turn the lower shaft until the button locks into the
positioning hole.
5. Tighten the knob.
1
8.4 ATTACH THE AUXILIARY HANDLE
1. Remove the screws from the handle with a Phillips
screwdriver (not provided).
2. Attach the auxiliary handle and lower clamp (1) on
the shaft.
3. Set the auxiliary handle in the most comfortable in
use position.
4. Tighten the screws.
7
English
EN
Loading ...
Loading ...
Loading ...