Loading ...
Loading ...
Loading ...
6 7
OPERATION ( cont.)
1. Disassemble the lid and food tray.
2. Hand clean these parts in warm soapy water, then dry them with a soft cloth.
WARNING! Base unit should not be submerged in water at any time, it will damage electronic
components and void the warranty.
• The “Low battery” light is flashing.
Replace the old batteries with 3 new “D” alkaline batteries. Normally 3 new “D” alkaline batteries
can last around 1 year.
WARNING!
• Requires three “D” batteries. Batteries NOT included. Use alkaline batteries only.
• Estimated life of one set of batteries is one year.
• Keep fingers and hands clear of rotating cover.
• Always turn unit off before cleaning.
• Always turn unit off before adding food.
• Always turn unit off before removing lid or food tray.
• Check the low battery light frequently to be sure the feeder has power.
• Check the level of food frequently to be sure the feeder is dispensing properly.
1. The Low Voltage indicator is on the right side of the control panel (Low battery). Before leaving
home or traveling, you should check to see if the low voltage light is on, if the unit is making a sound
or if the lights are on or flashing when food is dispensed. If so, please replace the batteries to avoid
starving your pet.
2. Do not put your fingers into the machine at any time.
3. Power switch. The power switch is located at the bottom of the product. If unit is shut down for
more than 10 seconds, the unit will be restored to factory default settings.
4. This product uses three “D” batteries. (alkaline batteries can last around 1 year.)
NOTE
- The old batteries should be dealt with according to the local regulations (familiarize yourself
with the environmental protection law).
- When the feeder is not used for a long time, remove the battery to prevent the electrolyte from
flowing out.
5. If you have any questions, please contact the dealer or manufacturer.
voice record
voice play
MIC location
The lid is washable. Food tray is washable.WARNING! Base unit should
not be submerged in water
CLEANING
TROUBLE SHOOTING
IMPORTANT NOTES
1. My pet feeder discharges inaccurately.
If after you use it for a period of time, this problem appears, this usually indicates that the battery
voltage is too low. Replace batteries.
2. My feeding device functions abnormally or the screen fades in an out.
If this problem appears, this usually indicates that the battery voltage is too low. Replace the batteries.
3. How do I view the parameters that I set?
fn the following order, press the breakfast button, lunch button, dinner button and the fourth meal
button so you can view the parameters you set. If you want to change the parameters, please re-set
the unit. Please note that if you replace the batteries owing to low voltage, you will need
to reprogram the feeder.
FREQUENTLY ASKED QUESTIONS
WARNING! This product contains chemicals known to
the State of California to cause cancer, and birth defects
or other reproductive harm. www.P65Warnings.ca.gov
Loading ...
Loading ...
Loading ...