Loading ...
Loading ...
Loading ...
Page 10
Unit
Specifications
and Features
Other Features
• Auto-Restart(some units)
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
• Anti-mildew (some units)
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
• Wireless Control(some units)
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
• Louver Angle Memory(some units)
When turning on your unit, the louver will
automatically resume its former angle.
For the USB device access, replacement,
maintenance operations must be carried
out by professional staff.
Set
temperature
1hr
Keep
running
SLEEP Operation
Saving energy during sleep
Heat mode(2 F/+1 C)per hour
for the first two hours
Cool mode(2 F/+1 C) per hour
for the first two hours
1hr
A guide on using the infrared remote is not
included in this literature package.
Not all
the functions are available for the air
conditioner, please check the indoor display
and remote control of the unit you purchased.
For multi-split air condtioners, the following
functions are not available:
Active clean function, Silence feature, Breeze
away function, Refrigerant leakage detection
function and Eco feature.
NOTE:
• Active Clean function(some units)
-- The Active Clean Technology washes away
dust, mold, and grease that may cause odors
when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A “pi-pi” sound will be heard.
The Active clean operation is used to produce
more condensed water to improve the cleaning
effect, and the cold air will blow out. After
cleaning, the internal wind wheel then keeps
operating with hot air to blow-dry the evaporator,
thus preventing the growth of mold and keeping
the inside clean.
-- When this function is turned on, the indoor
unit display window appears “CL ” , after 20
to 45 minutes, the unit will turn off automatically
and cancel Active Clean function.
• Breeze Away (some units)
This feature avoids direct air flow blowing on
the body and make you feel indulging in
silky coolness.
• Refrigerant Leakage Detection(some units)
The indoor unit will automatically display “EL0C” when it
detects refrigerant leakage.
• ECO Intelligent eye(some units)
The system is controlled intelligently under Intelligent
eye mode. It can detect the people’s activities in the
room. In cooling mode, when you are away for 30
minutes, the unit will automatically lower the
frequency to save energy(for Inverter models only).
And the unit will automatically start and resume
operation if sensing human activity again.
• Sleep Operation
The SLEEP function is used to decrease
energy use while you sleep (and don’t
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
When in COOL mode, the unit will increase the
temperature by 2°F (1°C) after 1 hour,
and will increase an additional 1°C (2°F) after
another hour
.
When in HEAT mode, the unit will decrease the
temperature by 2°F (1°C) after 1 hour,
and will decrease an additional 2°F (1°C)
after another hour.
The sleep feature will stop after 8 hours and the
system will keep running with final situation.
Loading ...
Loading ...
Loading ...