Loading ...
Loading ...
Loading ...
17
Tips & Reminders
Tips & Reminders
Steam Cleaner Tips & Reminders
This steam cleaning appliance has many practical uses that have not
been mentioned in this manual. Please refer to the Cleaning Reference
Guild included with this manual for tips and suggestions of where
and how to use the Steam Cleaner. Alternatively visit the website at
www.monsterappliances.com.au for additional information or contact
our Customer Support Line for assistance.
Steam cleaning allows the user to clean chemical-free by using the power
of steam, in place of harsh chemical-based detergents. The heat from the
steam softens and loosens dirt on surfaces, while the steam pressure lifts
the dirt away. All that is left to do is to wipe the surface to remove the dirt
and moisture using a microbre cloth or a cleaning cloth if the surface is
soiled or greasy.
TIP:
to pick up and hold dirt, a great aid in lifting and removing the dirt that
moisture to glide over surfaces, the steam cleaner provides moisture
Making Contact with Surfaces
The steam is at its hottest just as it leaves the nozzle/accessory. This is
the area of the steam output that should be used to clean to achieve
maximum performance. All accessories should make direct contact with
the surfaces being cleaned to transfer the heat from the Steam Cleaner
to the surface in order to soften and loosen dirt. If the accessory being
used does not make contact with the surface, the desired results may not
be achieved. If assistance is required contact our Customer Support Line.
TIP: steam will clean hard, sealed, non-porous surfaces in place of harsh
as carpets, rugs, lounges, children’s toys etc, steam will refresh and
spot clean. To clean carpets proper carpet cleaning equipment should
be used.
Water
Use ordinary tap water for all cleaning. In hard water areas, we
recommend distilled or demineralised water to reduce the formation of
calcium and other mineral deposits in the Steam Cleaner. Use distilled or
demineralised water when steaming light coloured fabrics to eliminate
the possibility of hard water stains.
IMPORTANT: Do not add cleaning solutions, perfumes, oils or any other
chemicals to the
Steam Cleaner and void the warranty.
Temperature
The temperature in the internal stainless steel Boiler reaches about 130°C.
The steam temperature just outside the tip of the nozzle/accessory is
between 105°C and 115°C. The temperature of the steam falls to 38°C at a
distance of 25cm from nozzle. This Steam Cleaner produces a drier steam
which cools very rapidly to avoid burns and injuries. Steam must make
direct contact with surfaces for it to clean effectively.
TIP: the hot steam can be used to kill dust mites in soft furnishings and
mattresses. Steam cleaning is ideal for asthma sufferers, persons with
skin sensitivities and anyone with chemical sensitivities.
12
Replacement of Brushes, Microbre Pads
and Accessories
The Nylon and Brass Detail Brushes and the Microbre Pad for the Small Brush and
Floor Brush provided with the Steam Cleaner are to get you started using your
Monster Steam Cleaner. As these brushes and microbre pads become dirty or
wear out, replacement brushes and microbre pads can be purchased from the
retailer from which you purchased your Steam Cleaner and/or from most other
electrical appliance retail outlets or visit www.monsterappliances.com.au.
It is normal to have replacements of the brushes and microbre pads close at hand
when doing cleaning as the brushes wear out or the microbre pads become dirty.
Any of the other accessory tools are replaceable by contacting the Monster
Customer Support Line. (See phone numbers on the back cover of this manual.)
Loading ...
Loading ...
Loading ...