Loading ...
Loading ...
Loading ...
15
Using The Iron Attachment
Using The Iron Attachment
Steam Release
To release steam press and hold the button on
the top of the Iron Attachment. The steam can
be locked for continuous steam output by sliding
the button backward. To unlock slide the button
forward to stop the continuous steam output.
TIP: to achieve the best ironing results, use steam
to moisten the fabric to release the wrinkles and
creases, then release the steam button to stop


Ironing Settings
The benet of using pressurised steam to iron is that the steam quickly
penetrates fabrics to remove wrinkles and creases faster and
easier than a normal iron. Ironing with pressurised steam
will reduce ironing time and achieve better ironing
results.
When ironing with pressurised steam, the dial on the
Iron Attachment should be set to the steam setting,
– just above the cotton setting on the Iron’s dial.
The steam setting on the dial does not need to be
changed when ironing with pressurised steam, no
matter what fabric type is being ironed.
NOTE: Ironing without pressurised steam (dry ironing)
– if choosing to iron without steam (dry ironing), then
the dial on the Iron Attachment will need to be changed
depending on the fabric type being ironed. The dial is used to lower the

needed for delicate garments to avoid scorching the fabric.
NOTE: when dry ironing, steam should not be used because the cooler
sole plate may cause the steam to cool down rapidly and recondense into
water droplets, causing water spots on clothes.
Maintenance of the Iron Attachment
The sole plate of the iron should be wiped down with a non-abrasive cloth.
Customer Support Line
If you have any questions, please call the Monster Customer Support Line.
N
y
l
o
n
S
i
l
k
W
o
o
l
C
o
t
t
o
n
L
i
n
e
n
Call: 1800 663 866 (Australia) or 0800 666 783 (NZ), or
Visit: www.monsterappliances.com.au
REMINDERS
Use tap water.
• If tap water is too hard, distilled or demineralized water should be used
to avoid the risk of sediment and mineral build-up in the Boiler.
• Do not add detergents, perfumes, oils or other chemical substances to
the Water Tank. This will cause damage to the Steam Cleaner and void
the warranty.
Loading ...
Loading ...
Loading ...