Loading ...
Loading ...
Loading ...
Problem Cause
The starter motor does not turn
the engine over.
The battery is too weak. Refer to
To charge the battery on page 19
.
The connection at the cable connectors on the battery terminals is bad.
Refer to
To clean the battery on page 18
.
A fuse is blown. Refer to
Fuses on page 5
.
The OPC does not operate correctly. Refer to
Operation conditions on page
9
.
The engine does not run
smoothly.
The fuel filter or fuel jet is clogged.
The check valve on the fuel tank cap is clogged.
The fuel tank is almost empty.
The spark plug is damaged.
Incorrect fuel mix or fuel type.
There is water in the fuel.
The air filter is clogged.
The engine apparently has no
power.
The air filter is clogged.
The spark plug is damaged.
There is air in the hydraulic system.
There is vibration in the prod-
uct.
The blades are loose. Refer to
To examine the blades on page 22
.
One or more of the blades are not balanced. Refer to
Throttle control on
page 4
.
The engine is loose.
The engine becomes too hot. The air filter or the cooling fins are clogged.
There is overload in the engine.
The airflow around the engine is not sufficient.
The engine speed regulator is damaged.
The oil level is too low.
There is dirt in the fuel line.
The spark plug is damaged.
The battery does not charge. The connection at the cable connectors on the battery terminals is bad.
Refer to
To clean the battery on page 18
.
The charging lead is disconnected.
The charging system does not operate correctly.
The product moves slowly, with
irregular speed or not at all.
The parking brake is engaged.
The hydraulic release lever is engaged.
The drive belt on the transmission is loose or damaged.
There is air in the hydraulic system.
26 2060 - 002 - 13.06.2023
Loading ...
Loading ...
Loading ...